Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to disassemble the car radio in the Hyundai IX35?

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Car stereo
Operation: How to disassemble the car radio in the Hyundai IX35?

Removing the car radio in the Hyundai IX35 is a very simple and fast operation, let's see how to proceed in this tutorial. First of all, let's make sure that the key is not inserted in order to operate safely, then insert a plastic spatula into the joint of the upper console and, levering it along the entire perimeter, disengage it from the dashboard. Then unscrew the two screws just released and repeat the operation for the lower panel, containing the emergency light button. At this point we can grab the car stereo, pull it towards us and extract it from the dashboard.


Posted on 6 October 2022 by ScegliAuto



How to install android car stereo on hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial we will see the procedure that will allow us to disassemble and replace the original car radio with the Android one on the Hyu
How to disassemble the car stereo of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) The guide shows how to disassemble the Hyundai IX35 car radio. With the plastic levers it is necessary to remove the plastic finishing cover placed o
How to disassemble the car stereo of a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before we can start, we will have to go and sit in the front driver's seat of our Hyundai IX35. So let's start by disengaging and removing the top co

    Frequently Asked Questions

    • Ix35 2009-2015 - What problems with the radio of the Hyundai Ix35? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos