Do it yourself
Frequently asked questions about cars and motorcycles

How to Install an Android Car Radio in the Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Car stereo

In this video tutorial, you will see the procedure to dismantle and replace the original car radio with an Android one in the Hyundai Ix35. First, dismantle part of the car's dashboard; then, remove the side pillars and the car radio by unscrewing the screws and disconnecting the electrical connector. At this point, run the wiring of the new car radio to connect it to the battery wires; then, make the necessary modifications to fit the new Android car radio into the dashboard, adapting it perfectly, following the video to the end!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai ix35 (2009-2015 / MK 1) Today we will see step by step instructions that will allow us to disassemble and remove the original radio of the Hyundai IX35. First of all, we get…
Hyundai ix35 (2009-2015 / MK 1) In today's article, we will show you how to replace the car radio in a Hyundai IX35. For this operation, you will need a special tool for plastic par…
Hyundai ix35 (2009-2015 / MK 1) Before you begin, sit in the driver's seat of your Hyundai IX35. Start by prying off and removing the upper cover of the radio using a thin but sturd…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos