Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to take out the car stereo of the Hyundai IX35

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Car stereo
Operation: How to take out the car stereo of the Hyundai IX35

The disassembly of the standard car radio is very simple to carry out and does not require the use of special extraction keys; therefore equip yourself with a plastic lever to be able to release the front fairing just above the car radio and then the band applied immediately below, where the button for the parking arrows is located; once these two elements have been removed, it is possible to access the fixing screws of the car radio itself (two upper and two lower) which, once unscrewed, can be extracted from its seat just enough to then disconnect the sockets and the jack of the antenna.


Posted on 8 September 2023 by ScegliAuto



How to disassemble the car radio in the Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) Removing the car radio in the Hyundai IX35 is a very simple and fast operation, let's see how to proceed in this tutorial. First of all, let's make s
How to install android car stereo on hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial we will see the procedure that will allow us to disassemble and replace the original car radio with the Android one on the Hyu
Replacing the outside rearview mirror on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To extract and subsequently replace the exterior rearview mirror on Hyundai Ix35 you simply have to pry it from behind with your hands, making it com

Other guides that may interest you

    Frequently Asked Questions

    • Ix35 2009-2015 - What problems with the radio of the Hyundai Ix35? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos