Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Antenna and Its Base on the Hyundai Getz

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Antenna

Video tutorial

These brief and simple steps will show you the procedure for removing and replacing the radio antenna and its base on the Hyundai Getz. First, get inside the vehicle and start by removing the grab handles and sun visors; it will be necessary to remove the front part of the headlining to access the internal part of the antenna, first removing the side plastic pillars, as shown in the video.

At this point, undo the nut of the antenna base to remove it, disconnecting the electrical connector; replace the antenna and reassemble everything!


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
How to Remove the Stereo from a Hyundai Getz
How to Remove the Stereo from a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Replace the stereo in your Hyundai Getz if damaged; let's see how to remove it using the removal keys. Insert the keys into the holes on the plastic …
Removing the Original Radio from a Hyundai Getz
Removing the Original Radio from a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Is it really that simple to remove an original radio from a Hyundai Getz? Follow this video closely to see how to perform the removal according to th…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos