Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from a Hyundai Getz

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

Video tutorial

Replace the stereo in your Hyundai Getz if damaged; let's see how to remove it using the removal keys. Insert the keys into the holes on the plastic trim of the stereo, pull the stereo towards you as shown in the video: extract the radio while being careful of the various wiring (disconnect the power connectors and the antenna cable).

Install the new original stereo or a generic brand with the appropriate adapter for the input and for connecting the terminals. Once the new stereo is installed, you can turn it on to check its operation.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Removing the Original Radio from a Hyundai Getz
Removing the Original Radio from a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Is it really that simple to remove an original radio from a Hyundai Getz? Follow this video closely to see how to perform the removal according to th…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
How to Remove the Door Panel on the Hyundai Getz?
How to Remove the Door Panel on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) As shown in this tutorial, removing the door panel on the Hyundai Getz is a very simple and quick operation. First, go inside the cabin, then using a…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos