Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on the Hyundai Getz?

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Door trim panel

As shown in this tutorial, removing the door panel on the Hyundai Getz is a very simple and quick operation. First, go inside the cabin, then using a cross-head screwdriver, unscrew the screws located inside the small glove compartment and the opening handle. Next, disconnect the control cable of the handle, remove the additional screws around the entire perimeter, and unclip the internal cover of the mirror. At this point, grasp the panel, pull it outward, and separate it from the door.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Hyundai Getz
How to Remove the Door Panel of the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) This guide will show you the instructions to remove and replace the front door panel of the Hyundai Getz. First, open the front door and begin unscre…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
How to Remove the Tailgate Panel on the Hyundai Getz?
How to Remove the Tailgate Panel on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) As you can see in this tutorial, removing the tailgate panel on the Hyundai Getz is an extremely simple and quick operation. Start by fully opening t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos