Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Disassembly of the instrument cluster on Hyundai Getz

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Instrument cluster
Operation: Disassembly of the instrument cluster on Hyundai Getz

In this video guide we will see the steps on how to disassemble the instrument cluster on a Hyundai Getz, following the instructions below. First we get inside the car and start by unscrewing the fixing screws of the instrument panel; they are found on the upper part of the shell and on the lower part of the panel itself, removing the plastic cover. At this point we bring the steering wheel backwards and we go to lever on the sides of the instrument panel, in order to remove it; we just have to disconnect the electrical connectors on the back.


Posted on 14 February 2024 by ScegliAuto



How to replace the instrument cluster bulbs on Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) In this video tutorial we will see how to disassemble the instrument cluster and how to replace the bulbs on a Hyundai Getz, in simple and quick step
How to replace instrument cluster lights on Hyundai Getz Mk1
Hyundai Getz (2002-2011 / MK 1) This guide shows how to replace the Hyundai Getz Mk1 instrument cluster bulbs. The first operation to perform is to lower the steering wheel to have
Where is the OBD2 port located on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) If you want to locate the OBD2 port in your Hyundai Getz on your own, all you have to do is follow these simple steps. First, reach the driver's seat

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos