Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Disassembly of the original Hyundai Getz car radio

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Car stereo
Operation: Disassembly of the original Hyundai Getz car radio

Very simple operation in removing an original car radio on Hyundai Getz? Let's see carefully in this video how to perform the disassembly following the guidelines. We use the original or aftermarket metal dongles to disassemble the Getz stereo. We insert the keys at the ends of the car radio (between the stereo and the covering), pull the stereo towards us with our hands as in the video, extract the car radio, paying attention to the various wiring of the same (disconnect the power supply terminals and the cable antenna). Finally we reassemble the original car radio or one of a generic brand with a special adapter for the input and for the connection of the terminals.


Posted on 8 October 2023 by ScegliAuto



How to remove the central dashboard of a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) How to disassemble the original car stereo of a Hyundai Getz? Let's see carefully in this video how to perform the disassembly. With a plastic lever
How to remove stereo on Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) We replace the Hyundai Getz stereo if damaged, let's see how it is disassembled using the disassembly keys. Insert the keys into the holes on the pla
Where is the OBD2 port located on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) If you want to locate the OBD2 port in your Hyundai Getz on your own, all you have to do is follow these simple steps. First, reach the driver's seat

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos