Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Dashboard of a Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Dashboard

How to remove the original radio from a Hyundai Getz? Follow this video closely to see how to perform the removal. Use a plastic lever to pry at the centre dashboard as shown in the video, then remove it from the central dashboard. Detach the original radio along with its trim from the dashboard. Disconnect the power cables and the antenna cable from the radio. Once the stereo is removed from the dashboard, disconnect the various wiring for the power and lighting of the knobs. Finally, refit the dashboard with the buttons and the radio as it was removed earlier.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
How to Replace the Instrument Cluster Bulbs on Hyundai Getz
How to Replace the Instrument Cluster Bulbs on Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) In this tutorial, learn how to remove the instrument cluster and replace its bulbs on a Hyundai Getz in simple, quick steps. First, get in the vehicl…
How to Replace the Climate Control Bulb on a Hyundai Getz
How to Replace the Climate Control Bulb on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To replace the climate control bulbs on the Hyundai Getz, remove the cover located under the steering column and detach the two side cords that secur…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos