Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Bulb on a Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Light bulb

To replace the climate control bulbs on the Hyundai Getz, remove the cover located under the steering column and detach the two side cords that secure the centre console. You will need to perform the same operation by removing the glove compartment from the passenger side and disconnecting the two cords inside. This will allow you to detach the climate control cover, disconnect the connector, and extract the temperature control switch: this can then be opened, and the bulb inside can be replaced.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Climate Control Buttons of the Hyundai Getz
How to Remove the Climate Control Buttons of the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To remove the climate control buttons of the Hyundai Getz, open the glove compartment on the passenger side to detach the trim surrounding the radio.…
How to Replace the Number Plate Bulb on a Hyundai Getz?
How to Replace the Number Plate Bulb on a Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) To replace the number plate light bulb on a Hyundai Getz, open the boot lid and remove the screws and rivets securing the internal plastic cover. Onc…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos