Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on a Hyundai Getz?

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

Video tutorial

In this tutorial, you will see how to replace the remote battery on a Hyundai Getz, a very simple and quick operation. You will need a replacement CR1220 battery, a small flathead screwdriver, and a crosshead screwdriver.

First, locate the small screw on the back of the remote, right at the base of the key, then unscrew it and open the cover. Next, remove the internal module, open it, and take out the old battery.

Finally, insert the new battery and reassemble everything.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Replacing the Key Battery on a Hyundai Getz
Replacing the Key Battery on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Let's see how to change the battery in the remote key for the Hyundai Getz. Take your remote key and, using a screwdriver, unscrew the tiny screw on …
How to Remove the Bumper on Hyundai Getz
How to Remove the Bumper on Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Want to remove the rear bumper from your Hyundai Getz? Here's how to do it. Using a screwdriver or battery-powered drill, unscrew the fastening screw…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos