Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Hyundai IX35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

Video tutorial

Before you begin, sit in the driver's seat of your Hyundai IX35. Start by prying off and removing the upper cover of the radio using a thin but sturdy tool. Next, repeat this step to unclip and extract the button panel located below the radio, then disconnect the relevant electrical connectors.

This will reveal the screws that secure the radio to the dashboard, which you need to unscrew and remove. At this point, extract the radio from its housing, then disconnect the rear electrical plugs, and you will have completed the disassembly.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Standard Radio from the Hyundai IX35
How to Remove the Standard Radio from the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today we will go through step-by-step instructions to dismantle and remove the standard radio from the Hyundai IX35. First, get inside the vehicle an…
How to Install an Android Car Radio in the Hyundai Ix35
How to Install an Android Car Radio in the Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial, you will see the procedure to dismantle and replace the original car radio with an Android one in the Hyundai Ix35. First, di…
How to reset the radio of the Hyundai IX35
How to reset the radio of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this video we will see how to reset the radio of a Hyundai IX35: we start with a soft reset, for which you just need to turn off the radio for 30 …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos