Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Light Bulb on a Hyundai I10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Light bulb

See other generations:
Video tutorial

Let's see how to change the daytime running light (DRL) bulb on a Hyundai I20. The video shows the car raised (even with makeshift means) for better accessibility. Remove the screws and clips of the plastic cover under the engine to access the headlamp compartment, then locate the relevant bulb holder and disconnect the electrical connector.

Unlock the bulb holder by turning it counterclockwise to remove it from the headlamp housing. Change the bulb, ensuring not to touch the glass of the new one with your fingers.

Reinsert the bulb holder with the new bulb into the housing and turn it clockwise to lock it. Reconnect the electrical connector, then switch on the lights for verification and reattach the plastic cover under the engine.


Posted on 23 February 2026 by ScegliAuto


Related tutorials

How to Change the Throttle Position Sensor on a Hyundai I10
How to Change the Throttle Position Sensor on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this brief and simple guide, we will go through the steps to remove and replace the throttle position sensor on a Hyundai I10. First, open the bon…
How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…
How to reset the tyre warning light on the Hyundai I10?
How to reset the tyre warning light on the Hyundai I10?
Hyundai I10 (2019-2026 / AC3, AI3) If your Hyundai I10, like all recently manufactured cars, has a flat or deflated tyre, the warning light will illuminate on the instrument panel. Onc…

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos