Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Throttle Position Sensor on a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013

In this brief and simple guide, we will go through the steps to remove and replace the throttle position sensor on a Hyundai I10. First, open the bonnet of your car and disconnect the electrical connector of the throttle position sensor, which is fixed to the throttle body. Then, unscrew its two securing screws to remove it, as shown in the video. Now, install the new throttle position sensor, using the reverse procedure of disassembly!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Clutch Cable on the Hyundai I10
How to Adjust the Clutch Cable on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main instructions that will allow you to adjust the clutch cable on the Hyundai I10. First, open the bonnet of the vehicle and start lo…
How to Change the Wiper Blades on a Hyundai i10?
How to Change the Wiper Blades on a Hyundai i10?
Hyundai I10 (2013-2020 / IA, MK 2) To replace the wiper blades on a Hyundai i10, lift the arms away from the windscreen until they are in a vertical position. Next, rotate the blade to…
How to adjust the clutch pedal of the Hyundai I10 1.1
How to adjust the clutch pedal of the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) Today's main instructions will show us how to adjust the clutch pedal play of the Hyundai I10 1.1. First, we open the car's hood and locate the clutc…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos