Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Throttle Body on the Hyundai I10?

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Throttle body

See other generations:
Video tutorial

To clean the throttle body on the Hyundai I10, start by loosening the two clamps located at both ends of the connection tube between the air filter and the throttle body. Once removed or loosened, disconnect the tube and proceed to clean it with a suitable spray.

Shake the can and give two or three sprays on the throttle body, allowing it to act for a few minutes, then start the car and, gradually accelerating, allow the spray to enter the throttle body. The cleaning is now complete, and you can reattach the tube and clamps.


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1
How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1
Hyundai I10 (2013-2020 / MK 2, IA) In this video tutorial, you will learn how to disassemble and clean the air duct and throttle body on the second series Hyundai I10, with a 1.1 petro…
How to Replace the Thermostat on a Hyundai I10 1.2
How to Replace the Thermostat on a Hyundai I10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) In this guide, we will see the main instructions for removing and replacing the thermostat on a Hyundai I10. First, open the bonnet and start by remo…
How to clean the IAC valve on a Hyundai i10.
How to clean the IAC valve on a Hyundai i10.
Hyundai I10 (2013-2020 / MK 2, IA) In this video, we will see how to clean the IAC (Idle Air Control) valve on a Hyundai I10. This component is used to regulate the airflow by bypassin…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos