|
Do it yourself
| |||
| ||||
An Issue with the Throttle Body on Hyundai and Kia Turbodiesel
Model: Hyundai Tucson
MK 3, TL
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
The issue is demonstrated on a Hyundai Tucson engine, a (U2/L) engine that the same YouTuber describes as very reliable; the only problem is with the throttle body, which presents symptoms such as the engine light being on, power loss, and the diagnosis showing the error "throttle valve - incorrect position". The cause is the accumulation of oil vapours in the intake system, which dirty the throttle valve and cause it to stick. The first visual sign is the electrical connector stained with oil. The solution is to remove the throttle body from the intake, open it by removing the torx screws, and clean both the electrical part (the cover) and the mechanical part (the gears and the throttle). On the latter, check for any broken teeth in the gears; apply specific grease to them; reassemble the components and perform the throttle learning via diagnostics. As a preventive measure, periodically check the crankcase ventilation system (PCV). In case of recurrence, consider installing an oil/air separator filter to reduce oil vapours in the intake.
Posted on 11 September 2026 by ScegliAuto
Related tutorials
Hyundai Tucson
(2015-2021 /
MK 3, TL)
Today, you will learn how to replace the steering wheel buttons on a Hyundai Tucson. Before removing the steering wheel, it is important to disconnec…
Hyundai Tucson
(2015-2021 /
MK 3, TL)
The tire pressure monitoring system (TPMS) indicator that signals a problem with tire inflation pressure is now present on all recently built vehicle…
Hyundai Tucson
(2015-2021 /
MK 3, TL)
A common problem on the Hyundai Tucson is the multimedia screen suddenly going black and stopping functioning. To reset it, there are several methods…
Other guides you may be interested in
|
How to Activate the Disabled TRC on the Toyota Yaris?
As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |