Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on the Hyundai i10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Air filter

If you intend to replace the engine air filter on this model of car, the description below provides all the necessary information and instructions for carrying out the replacement correctly, and you can also take a look at the images in the video. After lifting the bonnet, proceed to unscrew the fixing screws of the air duct located above the engine. Then remove the engine cover, and underneath it, you will find the filter that you can remove and replace with the new one. Finally, reposition the cover and reattach the air duct.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Injectors on Hyundai I10 1.0L
Replacing the Injectors on Hyundai I10 1.0L
Hyundai I10 (2007-2013 / PA, MK 1) This brief guide will show you how to remove and replace the petrol injectors on the Hyundai I10 1.0L. First, open the car's bonnet and start disconn…
Replacing the Cabin Air Filter on the Hyundai i10
Replacing the Cabin Air Filter on the Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) To ensure clean air in the cabin of the Hyundai i10, you must periodically replace the air filter, more frequently if you drive on unpaved or particu…
How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1
How to Clean the Air Duct and Throttle Body on a Hyundai I10 1.1
Hyundai I10 (2013-2020 / IA, MK 2) In this video tutorial, you will learn how to disassemble and clean the air duct and throttle body on the second series Hyundai I10, with a 1.1 petro…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos