Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin air filter of the Hyundai I10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Cabin air filter

In this article, we will explain how to replace the cabin air filter or pollen filter of the Hyundai I10. The procedure is simple and requires a flathead screwdriver. In this car model, the filter is located behind the glove compartment on the passenger side. To access it, you need to remove it by applying pressure on the appropriate pins as shown in the video tutorial below, you can then use the flathead screwdriver to apply pressure more comfortably, remove the glove compartment, after removing it you need to remove the fixing cover, to remove it you need to press on the appropriate clip, once the cover is removed you will have access to the filter, then you can remove the old filter, replace it, then close the cover and put the glove compartment back in its place.

Posted on 19 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Throttle Position Sensor on a Hyundai I10
How to Change the Throttle Position Sensor on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this brief and simple guide, we will go through the steps to remove and replace the throttle position sensor on a Hyundai I10. First, open the bon…
How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…
How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos