Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Gear Knob of a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shift knob

See other generations:
Video tutorial

Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear knob from the gear lever.

This will free the gear knob itself. Proceed to pull the gear knob off the lever.

At this point, you can completely remove the gear knob from your Hyundai I10. Once you have completed this step, you will have successfully disassembled it, and you are free to install the new gear knob.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Hyundai I10 (2013-2020 / MK 2, IA) Let's see how to replace the gear shift boot of a Hyundai I10: first, let's get the boot, which we can find on Amazon with the code B0B3HF47BX for th…
Hyundai I10 (2007-2013 / PA, MK 1) On the Hyundai i10, replacing the clutch requires removing the gearbox. Place the Hyundai i10 on axle stands, disconnect the battery, and clear the s…
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main steps that will allow you to remove and replace the clutch cable of the Hyundai i10, following these simple instructions. First, o…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos