Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable of the Hyundai i10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013

Below are the main steps that will allow you to remove and replace the clutch cable of the Hyundai i10, following these simple instructions. First, open the bonnet of the vehicle and locate the clutch cable, situated at the bottom of the gearbox; then disconnect the adjuster by unscrewing the bolt to remove the clutch cable, as illustrated in the video. At this point, disconnect the cable from the clutch pedal, removing it along with its sheath; all that remains is to replace it with a new one and finally adjust it from the adjuster.

Updated on 22 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Adjust the Clutch Cable on the Hyundai I10
How to Adjust the Clutch Cable on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main instructions that will allow you to adjust the clutch cable on the Hyundai I10. First, open the bonnet of the vehicle and start lo…
How to Replace the Clutch Cable on a Hyundai i10 MK1
How to Replace the Clutch Cable on a Hyundai i10 MK1
Hyundai I10 (2007-2013 / PA, MK 1) In today's video, you will see the steps to disassemble and replace the clutch cable on a first series Hyundai i10. First, get inside the vehicle and…
How to Adjust the Clutch Pedal on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, you will see the main instructions for adjusting the clutch on a Hyundai I10, as well as on other models from the manufacture…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos