Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch of the Hyundai I10?

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Clutch

See other generations:
Video tutorial

In order to replace the clutch of the Hyundai I10, it is necessary to lift the car so that the front wheels can be completely removed from their housing. Once the wheels are removed, it will be possible to locate the gearbox next to the engine block.

This will need to be removed by loosening the fastening screws and disconnecting the power cables. At this point, the clutch can be found between the engine and the flywheel, so that it can be replaced with a new piece.


Posted on 8 August 2025 by ScegliAuto


Related tutorials

How to Adjust the Clutch Cable on the Hyundai I10
How to Adjust the Clutch Cable on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main instructions that will allow you to adjust the clutch cable on the Hyundai I10. First, open the bonnet of the vehicle and start lo…
How to Replace the Clutch Cable of the Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main steps that will allow you to remove and replace the clutch cable of the Hyundai i10, following these simple instructions. First, o…
How do you adjust the clutch of the Hyundai I10?
How do you adjust the clutch of the Hyundai I10?
Hyundai I10 (2013-2020 / MK 2, IA) In order to adjust the clutch of the Hyundai I10, you need to open the hood so that you can access the components located inside the engine compartme…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos