Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch cable in a Hyundai I10?

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Clutch

Ok, so changing the clutch cable is not an impossible task but it requires a bit of skill. Disconnect the battery for safety, open the hood and locate the old cable, which usually starts from the clutch pedal and goes all the way to the clutch itself. Loosen the adjustment nut near the clutch lever and disconnect the cable from both the pedal and the lever. Now replace the old cable with the new one, making sure to position it in the same way. Reattach everything, adjust the tension so it is not too loose or too tight, and test the pedal. If it works, it means you did a great job. Take a test drive and you're good to go. If you don't feel comfortable doing it yourself, which is understandable, I recommend contacting a trusted mechanic.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Clutch Cable on the Hyundai I10
How to Adjust the Clutch Cable on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main instructions that will allow you to adjust the clutch cable on the Hyundai I10. First, open the bonnet of the vehicle and start lo…
How to Replace the Clutch Cable of the Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main steps that will allow you to remove and replace the clutch cable of the Hyundai i10, following these simple instructions. First, o…
How to adjust the clutch pedal of the Hyundai I10 1.1
How to adjust the clutch pedal of the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) Today's main instructions will show us how to adjust the clutch pedal play of the Hyundai I10 1.1. First, we open the car's hood and locate the clutc…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos