Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Hyundai i10.

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Battery

Briefly, we will see the instructions that will allow us to disassemble and replace the battery of the Hyundai I10. First, let's open the vehicle's hood and start disconnecting both battery terminals (positive and negative); then, we unscrew the battery bracket screw to remove it from its compartment, as shown in the video. At this point, we install and insert the new battery, of the correct type and with the same amperage, in the right direction; we connect it electrically and secure the bracket, finally checking the engine ignition.

Posted on 22 December 2025 by ScegliAuto

Video tutorial

Related tutorials
…
How to Replace the Battery of the Hyundai i10?
How to Replace the Battery of the Hyundai i10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the battery of the Hyundai i10, open the bonnet to access the components in the engine compartment: the battery is positioned on the right…
Replacing Key Battery on Hyundai i10
Replacing Key Battery on Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) Is the Hyundai i10 key battery dead? Here's how to replace the battery. Take your remote and unscrew the tightening screw with a screwdriver, pry bet…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos