Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Key Battery on Hyundai i10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

Is the Hyundai i10 key battery dead? Here's how to replace the battery. Take your remote and unscrew the tightening screw with a screwdriver, pry between the two plastic halves until they separate, and remove the battery holder and the battery itself.

Take a new one of the same size and voltage. Reassemble the battery holder and close the plastics.

Reattach the cap on the key remote until you hear the click of locking. Check the correct operation of the remote by testing the door opening and closing buttons.

Screw in the tightening screw.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Hyundai I10 Remote?
How to Replace the Battery in the Hyundai I10 Remote?
Hyundai I10 (2013-2020 / MK 2, IA) To replace the battery in the Hyundai I10 remote, loosen the screw located on the back of the device, just below the key. Once the screw is loosened,…
How to Replace the Remote Battery in a Hyundai i10
How to Replace the Remote Battery in a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) In this tutorial, you will learn how to replace the remote battery in a Hyundai i10 by following a few simple steps. First, obtain a battery (model C…
How to replace the remote key battery in a Hyundai i10
How to replace the remote key battery in a Hyundai i10
Hyundai I10 (2019-2026 / AC3, AI3) To replace the battery in the remote key of a Hyundai i10, press the unlock button to extract the mechanical key from the remote. Then locate the sma…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos