Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Hyundai I10 - Key

Hyundai I10 (2007-2013 / PA, MK 1)
How to replace the Hyundai I10 remote control shell?
In this tutorial we can see how to replace the shell of the Hyundai I10 remote control, an extremely simple and fast operation. To do this, in addition to the …read all…
Posted on 31 May 2023 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to replace the remote control battery in a hyundai i10
In this video tutorial we can see how you can replace the remote control battery in a Hyundai I10 by following a few simple steps that will help you manage …read all…
Posted on 6 May 2023 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to replace the battery in the remote control of the Hyundai I10?
In order to replace the battery of the Hyundai I10 remote control you need to loosen the screw located on the back of the device, immediately under the key. …read all…
Posted on 14 July 2022 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to replace the remote control shell of the Hyundai I10
The guide shows you how to replace the Hyundai i10 remote control shell. To perform this operation, you can use a Circlip pliers, of the type that opens the …read all…
Posted on 10 April 2024 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to remove key from Hyundai I10
Remove the key shell of a Hyundai I10? We disassemble the key and replace the cover or the battery. We take the key and locate the tightening screw. We unscrew …read all…
Posted on 23 December 2023 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
Hyundai i10 key battery replacement
Hyundai i10 key battery low? Let's see how to replace the battery. We take our remote control and unscrew the tightening screw with a screwdriver, pry between …read all…
Posted on 30 November 2023 by ScegliAuto
Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos