Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : How to remove key from Hyundai I10

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 1, PA - Years 2007-2013
Part: Key
Operation: How to remove key from Hyundai I10

Remove the key shell of a Hyundai I10? We disassemble the key and replace the cover or the battery. We take the key and locate the tightening screw. We unscrew the screw above the key with a screwdriver. Once the screw is removed, we pry until the cover opens, then, extract the battery with a small screwdriver, remove the metal key and the motherboard if to be changed. We mount the battery in the cover if to change. We join the two covers and screw the tightening screw. We check the exact functioning of the remote control by pressing the buttons above it.


Posted on 23 December 2023 by ScegliAuto



How to open the fuel door of the Hyundai i10.
Hyundai I10 (2013-2020 / MK 2, IA) As you can see very well in the video, opening the fuel door (gasoline) of your Hyundai I10 car is very simple. Unlike other cars where you simply pr
How to remove the gear knob of a Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) Before we can start, we will have to go and sit in the driver's seat of our Hyundai I10. So let's start by grabbing the gear knob with your hand. Aft
How to replace the remote control battery in a hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) In this video tutorial we can see how you can replace the remote control battery in a Hyundai I10 by following a few simple steps that will help you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos