Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Tires

Hyundai I10 - Tires

Hyundai I10 (2007-2013 / PA, MK 1)
How is the correct inflation of the Hyundai I10 tires performed?
Proper tire pressure leads to a smoother ride and reduces the risk of accidents and tire wear. When inflating the tires, such as in the case of the Hyundai …read all…
Posted on 10 August 2023 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to use the tire inflation kit in the Hyundai I10
In today's video we see how to use the inflate and repair kit of the Hyundai I10. This device is supplied with the car instead of the spare wheel or spacer, …read all…
Posted on 20 December 2022 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to reset the tire warning light on Hyundai I10
Let's see in today's video how you can turn off the flat tire warning in the Hyundai i10. First, let's equip ourselves with a compressor with relative pressure …read all…
Posted on 16 April 2024 by ScegliAuto
Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos