Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Door panel

Hyundai I10 - Door panel

Hyundai I10 (2013-2020 / IA, MK 2)
How to disassemble the door panel in the Hyundai I10?
In this tutorial we can see how to disassemble the door panel in the Hyundai I10, an extremely simple and quick operation. First of all, we open the door in …read all…
Posted on 11 May 2024 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to remove the front door panel of the Hyundai I10
Let's find out the necessary guide that will allow us to remove and replace the front door panel of the Hyundai I10. First we open the front door and begin to …read all…
Posted on 23 September 2022 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to remove the door panel in the Hyundai I10?
In the first Hyundai I10 model, the one produced between 2007 and 2013, the door panel is held in place with six screws. Two of these are located on the right …read all…
Posted on 18 August 2022 by ScegliAuto
Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos