Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel in the Hyundai I10?

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Door trim panel

In this tutorial we can see how to disassemble the door panel in the Hyundai I10, an extremely simple and quick operation. First of all, we open the door in which we will work, then, using a small screwdriver with a flat tip, we detach the cap located inside the opening handle and unscrew the screw just released. We continue by disengaging the internal cover of the mirror, unscrewing the additional screws indicated and separating the panel from the door by pulling it towards us. To mount the replacement, simply follow the reverse procedure.

Posted on 11 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of the Hyundai I10
How to Remove the Front Door Panel of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Follow this guide to dismantle and replace the front door panel of the Hyundai I10. First, open the front door and start removing the plastic caps lo…
How to reset the oil light on the 2014 Hyundai I10
How to reset the oil light on the 2014 Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) To manually reset the service light on your second generation Hyundai i10 (2014), simply follow the procedure described in our new guide. First, ente…
How to Remove the Door Panel on a Hyundai i10?
How to Remove the Door Panel on a Hyundai i10?
Hyundai I10 (2007-2013 / PA, MK 1) In the first model of the Hyundai i10, produced between 2007 and 2013, the door panel is secured in place with six screws. Two of these are located o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos