Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Hyundai i10?

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

In the first model of the Hyundai i10, produced between 2007 and 2013, the door panel is secured in place with six screws. Two of these are located on the right edge of the panel, two on the left edge, while the other two are in the central handle recess and behind the door handle.

Remove all screws with a screwdriver or, if available, an electric screwdriver. Then detach the handle trim and the plastic at the corner of the door.

Finally, pull off the panel and disconnect the electrical connector.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Hyundai I10
How to Remove the Front Door Panel of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Follow this guide to dismantle and replace the front door panel of the Hyundai I10. First, open the front door and start removing the plastic caps lo…
How to Remove the Door Panel on the Hyundai I10?
How to Remove the Door Panel on the Hyundai I10?
Hyundai I10 (2013-2020 / MK 2, IA) In this tutorial, you will learn how to remove the door panel on the Hyundai I10, a very simple and quick operation. First, open the door you will be…
How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos