Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : Cabin air filter

Hyundai I10 - Cabin air filter

Hyundai I10 (2013-2020 / IA, MK 2)
Replacement of the Hyundai I10 cabin air filter

To always have clean air in the cabin of the Hyundai i10, we need to periodically replace the air filter, more frequently if we drive on dirt roads or …read all…
Posted on 7 January 2024 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How do you replace the cabin filter of the Hyundai I10?

In order to replace the cabin filter of the Hyundai I10, you need to open the glove compartment located on the front passenger side. Once opened, you will need …read all…
Posted on 21 September 2023 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to replace a cabin filter on Hyundai I10

In this video tutorial we can see how it is possible to replace the cabin filter on Hyundai I10, following some basic steps: the first thing to do is to buy a …read all…
Posted on 31 August 2022 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
Cabin air filter replacement

The passenger compartment air filter is located on the passenger side, behind the glovebox: open the flap, release the end-of-stroke clips on the sides of the …read all…
Posted on 26 August 2023 by ScegliAuto

Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos