Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : Cabin air filter replacement

Hyundai I10 - Video tutorial

Model: Hyundai I10 MK 1, PA - Years 2007-2013
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located on the passenger side, behind the glovebox: open the flap, release the end-of-stroke clips on the sides of the compartment by rotating them so that it can be completely overturned and the air conveyor can be accessed; then remove the filter housing protection cap and extract it, make sure there are no dirt residues and insert the new filter (it is suggested to choose one with activated carbon) respecting the direction of the air flow, indicated by arrows on the filter itself; finally apply the cap and reposition the door of the glove compartment.


Posted on 26 August 2023 by ScegliAuto



Replacement of the Hyundai I10 cabin air filter
Hyundai I10 (2013-2020 / MK 2, IA) To always have clean air in the cabin of the Hyundai i10, we need to periodically replace the air filter, more frequently if we drive on dirt roads o
How to replace a cabin filter on Hyundai I10
Hyundai I10 (2007-2013 / MK 1, PA) In this video tutorial we can see how it is possible to replace the cabin filter on Hyundai I10, following some basic steps: the first thing to do is
How to replace the engine air filter on a Hyundai I10.
Hyundai I10 (2013-2020 / MK 2, IA) If we intend to replace the engine air filter on this car model, in the description we report below we will find all the necessary information and in

    Frequently Asked Questions

    • I10 2019-2026 - Where is the cabin air filter on the Hyundai I10 located? Read Answer
    • I10 2007-2013 - Where is the Hyundai I10 air conditioning filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos