Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Replacement of the Hyundai I10 cabin air filter

Hyundai I10 - Video tutorial

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Cabin air filter
Operation: Replacement of the Hyundai I10 cabin air filter

To always have clean air in the cabin of the Hyundai i10, we need to periodically replace the air filter, more frequently if we drive on dirt roads or particularly dusty ones. To replace it, position yourself in front of the passenger side glove compartment and open it. Use leverage on the short sides of the compartment to release and rotate it downwards. On the left side, you will find the long and narrow cover of the filter box. After removing it, we can slide out the old filtering element and replace it with a new one, paying attention to the correct installation direction. Close the cover and reattach the glove compartment.


Posted on 7 January 2024 by ScegliAuto

    Frequently Asked Questions

    • I10 2019-2026 - Where is the cabin air filter on the Hyundai I10 located? Read Answer
    • I10 2007-2013 - Where is the Hyundai I10 air conditioning filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos