Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Injectors on Hyundai I10 1.0L

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel injectors

See other generations:
Video tutorial

This brief guide will show you how to remove and replace the petrol injectors on the Hyundai I10 1.0L. First, open the car's bonnet and start disconnecting the air intake hose from the air filter box; disconnect the mass/air sensor hose and remove the entire air filter box, as shown in the video.

Next, remove the injector rail by unscrewing the screws and disconnecting the connectors; then replace the individual injectors with new ones, as well as the original ones, finally reassembling the air filter box.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…
How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…
Clutch Replacement on the Hyundai I10 1.1 Petrol
Clutch Replacement on the Hyundai I10 1.1 Petrol
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, discover the steps to perform a DIY clutch change on the first series Hyundai I10 with a 1.1 petrol engine. First, lift the v…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos