Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : Replacing the clutch on the Hyundai I10 1.1 Petrol

Hyundai I10 - Video tutorial

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Clutch
Operation: Replacing the clutch on the Hyundai I10 1.1 Petrol

Let's find out in this video tutorial the steps to be able to change the clutch in a "do-it-yourself" way on the Hyundai I10 first series, with 1.1 petrol engine. First of all, we lift the car with stands and start by removing the lower engine protection; after which we drain the engine oil and begin to remove the front wheels, extracting the left front axle shaft; we remove the battery and the engine mount, lifting it from below with a jack. At this point we disconnect the various transmission cables and the suspension, unscrewing the gearbox screws to access and replace the clutch.


Posted on 26 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • I10 2013-2020 - How much does it cost to replace the clutch on the Hyundai I10? Read Answer
    • I10 2007-2013 - How much does a Hyundai i10 clutch repair cost? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos