Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to replace the timing belt of a Hyundai I10?

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Timing belt

The replacement of the timing belt on a first-generation Hyundai i10 (2007-2013), both with a 1.1 MPI (petrol) engine and a 1.2 MPI (petrol) engine, is recommended at an interval of 90,000/100,000 kilometers or five years, depending on which comes first. However, it is always recommended to check this interval in your owner's manual. The video tutorial shows how to replace the timing belt on a Hyundai i10, but since it is a fairly complex job, it is recommended to have it done by a professional.

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Timing Belt on the Hyundai I10 1.1
How and When to Change the Timing Belt on the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) This brief guide provides the main instructions on how and when to change the timing belt on the first-generation Hyundai I10 with a 1.1 petrol engin…
How to replace the water pump of the Hyundai I10
How to replace the water pump of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Replacing the water pump of a Hyundai i10 vehicle is a fairly simple operation to perform independently. The water pump of the Hyundai is located nea…
How to Replace the Timing Belt on a Hyundai i10?
How to Replace the Timing Belt on a Hyundai i10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the timing belt on a Hyundai i10, open the bonnet to access the components in the engine bay. On the left side, locate the timing belt pro…

Other guides you may be interested in

    Frequently Asked Questions

    • I10 2013-2020 - When does the timing belt of a Hyundai i10 need to be replaced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos