Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt and Water Pump on a Hyundai i10 1.1

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

In this guide, you will find instructions to remove and replace the timing belt and water pump on a Hyundai i10 1.1. First, raise the vehicle and remove the front right wheel, then take off the wheel arch liner. Remove the alternator belt and detach the crankshaft pulley by unscrewing its bolts, as shown in the video.

Next, remove the timing cover to access the timing belt and water pump; take the necessary references to replace the timing belt, then remove the water pump casing to replace it!


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on the Hyundai I10
How to Replace the Water Pump on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Replacing the water pump on a Hyundai I10 vehicle is a fairly straightforward task to perform independently. The water pump is located near the engin…
Replacing the Timing Belt on a Hyundai I10
Replacing the Timing Belt on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Replacing the timing belt on a Hyundai I10, here’s how to do it. Lift the front bonnet of the car; remove the soundproofing panel, air filter housing…
How and When to Change the Timing Belt on the Hyundai I10 1.1
How and When to Change the Timing Belt on the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) This brief guide provides the main instructions on how and when to change the timing belt on the first-generation Hyundai I10 with a 1.1 petrol engin…

Other guides you may be interested in

    Frequently Asked Questions

    • I10 2013-2020 - When does the timing belt of a Hyundai i10 need to be replaced? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos