Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Manual Gearbox Oil in a Hyundai IX35 6-Speed

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Transmission

Video tutorial

The oil used in this video is a 75W85 GL4; never use a GL5 as it can damage the synchronisers. Warm up the engine, loosen the filler cap located at the top front; if it doesn't unscrew, do not proceed! If it does unscrew, also unscrew the drain plug at the bottom and let the oil drain into a container.

Refit a new drain plug to 10/50 Nm. Fill through the filler hole with a pump or a funnel and flexible hose; add oil until it overflows from the level hole: this indicates that the correct level has been reached. Refit the filler cap and check for leaks.

Take a short test drive. Of course, dispose of the used oil at an authorised centre properly.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Hyundai IX35?
How to Replace the Gear Knob on a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) To replace the gear knob on the Hyundai IX35, grasp the old knob and disconnect the internal clips that secure it to the corresponding lever. Once th…
How to Change the Engine Oil on a Hyundai Ix35
How to Change the Engine Oil on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To change the engine oil on a Hyundai Ix35, loosen the bolts securing the plastic panel located at the bottom of the car, near the engine compartment…
How to Replace the Gear Gaiter on the Hyundai IX35
How to Replace the Gear Gaiter on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In today's video, you will learn how to replace the gear gaiter on the Hyundai IX35. First, unscrew the gear knob by turning it anti-clockwise while …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos