Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How do you replace the gear knob of the Hyundai IX35?

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Gear Shift Knob
Operation: How do you replace the gear knob of the Hyundai IX35?

In order to replace the gear knob of the Hyundai IX35, you need to grasp the old knob and release the internal clips that hold the knob to the corresponding lever. Once the internal clips are released, it will be possible to pull the knob upwards to detach it from its lever. Once the old knob is removed, you can position the new one on the corresponding lever so that it is locked with the internal clips. At this point, you can check that it does not cause any issues during gear changes.


Posted on 26 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos