Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to replace the headlight bulb on Hyundai IX35

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Headlight bulb
Operation: How to replace the headlight bulb on Hyundai IX35

In this short video we will see the instructions that will allow us to remove and replace the headlight bulb on the first generation Hyundai IX35. First of all we open and lift the bonnet of our car and we go to remove the plastic cap protecting the bulb, turning it; then we disconnect the electrical connector of the bulb and unhook the metal clip to remove it and replace it with the new one, as shown in the video. At this point we insert the lamp correctly, of the right type (in this case type H7), and reassemble everything!


Posted on 15 February 2024 by ScegliAuto



How to replace the headlight bulb on Hyundai ix35
Hyundai ix35 (2009-2015 / MK 1) Before we can begin, we will have to go and open the front hood of our Hyundai ix35. The right headlight bulb block is located in the lower right cor
Hyundai IX35 headlight removal
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial we will see how to remove the headlight of a Hyundai Ix35. First we open the bonnet and with a ratchet wrench with socket we u
Hyundai Ix35 headlight bulbs replacement
Hyundai ix35 (2009-2015 / MK 1) Replacing burnt out bulbs on a Hyundai Ix35, let's see the disassembly on the headlight. We open the front hood by pulling the lever located at the b

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos