Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight LED on a Hyundai Ix35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Headlight bulb

Open the bonnet and insert the support rod. Remove the round rear cover located behind the headlamp by slightly unscrewing and pulling it. To remove the LED bulb, simply repeat the operation performed with the cover, that is, slightly unscrew it and pull it out of its housing. Remember that the wiring used on Hyundai and Kia has reversed polarity, so you have two options: either purchase LEDs supplied by Hyundai with the connector corresponding to the socket or connect the plug the other way around. Once the new LED is connected, reinsert it into its housing.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Hyundai Ix35
Replacing Headlight Bulbs on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To replace blown bulbs on a Hyundai Ix35, let's look at removing the front headlight. Open the front bonnet by pulling the lever located at the botto…
How to Replace the Front Headlight Bulb on a Hyundai IX35
How to Replace the Front Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this short video, see the instructions that will allow you to remove and replace the front headlight bulb on the first-generation Hyundai IX35. Fi…
How to Change the Headlight Bulb on a Hyundai IX35
How to Change the Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this article, we will show you how to replace the front headlight bulb on a Hyundai IX35. For this operation, you will need a flathead screwdriver…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos