Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bulb on a Hyundai ix35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

Video tutorial

Before you begin, open the bonnet of your Hyundai ix35. The bulb holder for the right front headlamp is located in the bottom right corner of the engine bay. Start by unscrewing and removing the plastic cover of the bulb. This will expose the blown bulb.

Next, disconnect the rear electrical connector. After that, extract the bulb from its housing.

You have now completed the disassembly. To fit the new bulb and close everything up, simply reverse these steps, and you will have successfully completed the replacement.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Headlight Bulb on a Hyundai IX35
How to Change the Headlight Bulb on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In this article, we will show you how to replace the front headlight bulb on a Hyundai IX35. For this operation, you will need a flathead screwdriver…
How to Remove the Windscreen and Seal on Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial, you will see the main instructions for removing and replacing the windscreen and its seal on a Hyundai Ix35. First, open the …
How to Replace the Air Filter on a Hyundai IX35
How to Replace the Air Filter on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before you start, open the bonnet of your Hyundai IX35. Begin by unclipping and moving the clips that secure the top cover of the air filter. Next, u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos