Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Hyundai IX35?

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Service warning light

Before you start, sit in the driver's seat of your Hyundai IX35. Begin by activating the instrument panel by pressing the ignition button. Next, repeatedly press the selection button until you reach the "Tyre Pressure" option. Once there, select and confirm the "Maintenance Due" option. At this point, press and hold the "OK" button until the "Service" light turns off. Once it is off, release the button, and you will have completed the reset.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Hyundai Ix35?
How to Reset the Service Light on a Hyundai Ix35?
Hyundai ix35 (2009-2015 / MK 1) To reset the Service light on a Hyundai Ix35, first replace the engine oil. Once this operation is complete, enter the cabin to reset the light. Turn…
How to reset the tyre light on the Hyundai IX35
How to reset the tyre light on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Resetting the tyre light on your Hyundai IX35 is very simple, and the procedure to carry out the operation is truly within anyone's reach. Let's find…
How do you reset the Service light on the Hyundai Ix35?
How do you reset the Service light on the Hyundai Ix35?
Hyundai ix35 (2009-2015 / MK 1) The Service light that appears on the instrument panel of the Hyundai Ix35 can be reset by performing an oil change: once this operation has been car…

    Frequently Asked Questions

    • Ix35 2009-2015 - How to reset the oil level warning light on Hyundai ix35? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos