Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clutch Pedal on Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
This video is currently unavailable

In this video tutorial, you will see the main instructions for adjusting the clutch on a Hyundai I10, as well as on other models from the manufacturer. First, measure the play of your clutch pedal in centimetres; then open the bonnet of your car and locate the clutch cable.

At this point, you will find a screw at the bottom of the cable for adjusting the pedal; tighten the screw to remove the excessive play in the clutch pedal. Finally, check the result achieved!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to adjust the clutch pedal of the Hyundai I10 1.1
How to adjust the clutch pedal of the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) Today's main instructions will show us how to adjust the clutch pedal play of the Hyundai I10 1.1. First, we open the car's hood and locate the clutc…
How do you adjust the clutch of the Hyundai I10?
How do you adjust the clutch of the Hyundai I10?
Hyundai I10 (2013-2020 / MK 2, IA) In order to adjust the clutch of the Hyundai I10, you need to open the hood so that you can access the components located inside the engine compartme…
How to Adjust the Clutch Cable on the Hyundai I10
How to Adjust the Clutch Cable on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Below are the main instructions that will allow you to adjust the clutch cable on the Hyundai I10. First, open the bonnet of the vehicle and start lo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos