Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Fuel injectors

Hyundai I10 - Fuel injectors

Fuel Injectors Hyundai I10 (2007-2013 / pa, mk 1)

Hyundai I10 (2007-2013 / PA, MK 1)
Replacing the Injectors on Hyundai I10 1.0L
This brief guide will show you how to remove and replace the petrol injectors on the Hyundai I10 1.0L. First, open the car's bonnet and start disconnecting the …Read all…
Posted on 12 April 2026 by ScegliAuto
Accelerator (1) Antenna (1) Car stereo (6) Battery (5) Spark plugs (8) Key (12) Timing belt (12) V-belt (2) A/C controls (1) Onboard computer (4) Checks and maintenance (18) Throttle body (2) Dashboard (1) Shifter boot (3) Side marker light (1) Headlight (12) Tail light (6) Fog lights (1) Air filter (1) Cabin air filter (8) Fuel filter (1) Parking brake (1) Clutch (5) A/C system (1) Fuel injectors (1) Window switch (1) Light bulb (5) Headlight bulb (13) Tail light bulb (2) Interior dome light bulb (1) (1) Engine (1) Starter motor (1) Transmission fluid (2) Clock (8) Door trim panel (3) Front bumper (2) Rear bumper (2) Brake pads (1) Tires (2) Shift knob (3) Pump (3) Fuel pump (3) Instrument cluster (4) Radiator (2) Fuse box (16) Seat (1) Side mirror (1) Warning light – error code (13) (19) Tire pressure warning light (5) Service warning light (50) Fuel cap (1) Windshield wipers (1) Thermostat (3) Cylinder head (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos