Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Battery

Hyundai I10 - Battery

Hyundai I10 (2007-2013 / PA, MK 1)
How do i replace the battery of the Hyundai I10?
In order to replace the Hyundai I10 battery, you have to open the hood to access the components inside the engine compartment: the battery is positioned on the …read all…
Posted on 16 October 2022 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to replace the battery of a Hyundai I10
In this video tutorial we are shown how to proceed in order to replace the battery of a Hyundai I10 car. The first battery is located in the engine compartment …read all…
Posted on 9 August 2022 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How do i replace the battery of the Hyundai I10?
In order to replace the Hyundai I10 battery you need to open the hood, in order to have access to the components inside the engine compartment: on its right …read all…
Posted on 22 July 2022 by ScegliAuto
Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos