Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Hyundai i10?

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Battery

To replace the battery of the Hyundai i10, open the bonnet to access the components in the engine compartment: the battery is positioned on the right side, immediately behind the left front headlamp. To remove the battery from its housing, unscrew all the bolts securing it and then disconnect the power cables connected to it. This will free the device, allowing you to insert a new one. Once the new battery is in place, connect and secure it properly.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in the Hyundai I10 Remote?
How to Replace the Battery in the Hyundai I10 Remote?
Hyundai I10 (2013-2020 / IA, MK 2) To replace the battery in the Hyundai I10 remote, loosen the screw located on the back of the device, just below the key. Once the screw is loosened,…
How to replace the battery of the Hyundai I10?
How to replace the battery of the Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To replace the battery of the Hyundai I10, open the bonnet to access the components inside the engine compartment. On the right side, you will locate…
How to replace the battery of the Hyundai i10.
How to replace the battery of the Hyundai i10.
Hyundai I10 (2007-2013 / PA, MK 1) Briefly, we will see the instructions that will allow us to disassemble and replace the battery of the Hyundai I10. First, let's open the vehicle's h…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos