Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Radiator

Hyundai I10 - Radiator

Radiator Hyundai I10 (2007-2013 / pa, mk 1)

Hyundai I10 (2007-2013 / PA, MK 1)
Replacement of the cooling radiator of the Hyundai I10 1.1
In this guide we will see the instructions that will allow us to disassemble and replace the engine cooling radiator of the Hyundai I10 1.1. First of all, we …Read all…
Posted on 25 June 2025 by ScegliAuto
Hyundai I10 (2007-2013 / PA, MK 1)
How to Replace the Radiator on a Hyundai I10?
To replace the radiator on a Hyundai I10, loosen all the screws securing the front bumper. These will be located inside the wheel arches, at the top of the …Read all…
Posted on 15 June 2026 by ScegliAuto
Accelerator (1) Antenna (1) Car stereo (6) Battery (5) Spark plugs (8) Key (12) Timing belt (12) V-belt (2) A/C controls (1) Onboard computer (4) Checks and maintenance (18) Throttle body (2) Dashboard (1) Shifter boot (3) Side marker light (1) Headlight (12) Tail light (6) Fog lights (1) Air filter (1) Cabin air filter (8) Fuel filter (1) Parking brake (1) Clutch (5) A/C system (1) Fuel injectors (1) Window switch (1) Light bulb (5) Headlight bulb (13) Tail light bulb (2) Interior dome light bulb (1) (1) Engine (1) Starter motor (1) Transmission fluid (2) Clock (8) Door trim panel (3) Front bumper (2) Rear bumper (2) Brake pads (1) Tires (2) Shift knob (3) Pump (3) Fuel pump (3) Instrument cluster (4) Radiator (2) Fuse box (16) Seat (1) Side mirror (1) Warning light – error code (13) (19) Tire pressure warning light (5) Service warning light (50) Fuel cap (1) Windshield wipers (1) Thermostat (3) Cylinder head (1)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos