Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I10
    4. : Light bulb

Hyundai I10 - Light bulb

Hyundai I10 (2013-2020 / IA, MK 2)
How to replace the front fog light bulb of the 2013 Hyundai I10?
The replacement of the left fog light bulb on a Hyundai I10 vehicle involves short and simple steps that can be done independently. To replace the bulb, we …read all…
Posted on 17 January 2024 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to remove and replace the brake light bulb on a Hyundai I10.
In this video, we see how to remove and change the bulb of a brake light on a Hyundai I10: we will need a Philips screwdriver to remove the three screws …read all…
Posted on 11 July 2023 by ScegliAuto
Hyundai I10 (2013-2020 / IA, MK 2)
How to replace the headlight bulb on Hyundai I10?
To be able to replace the headlight bulb of the Hyundai I10 you have to open the hood to access the engine compartment and turn the protective cap of the rear …read all…
Posted on 17 March 2024 by ScegliAuto
Antenna (1) Car stereo (6) Battery (3) Spark plugs (6) Key (6) Timing belt (9) V-belt (1) -board computer (7) Checks and maintenance (32) Throttle body (1) Dashboard (1) Gearshift gaiter (2) Side indicator light (1) Headlight (9) Tail light (4) Fog lights (1) Air filter (1) Cabin air filter (4) Petrol filter (1) Clutch (1) Window lift switch (1) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Starter motor (1) Gear oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Tires (3) Gear Shift Knob (1) Pump (1) Fuel pump (2) Instrument cluster (11) Radiator (1) Fuse box (2) Outside rearview mirror (1) Thermostat (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos