|
Do it yourself
| |||
| ||||
How to Remove and Replace the Stop Bulb on a Hyundai i10
Model: Hyundai I10
MK 2, IA
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Video tutorial
In this video, see how to remove and change the stop bulb on a Hyundai i10: you will need a Philips screwdriver to remove the three screws located on the back of the tailgate that hold the light unit in place. Once the three screws are removed, pull the light towards you, being careful of the electrical wires connected. The top bulb is the stop bulb, so remove it by turning it a quarter turn and then replace it. Remember not to touch the glass of the new bulb with bare hands, as this will significantly reduce its lifespan. Test the functionality by having an assistant press the brake pedal. Reinsert the bulb holder. Then, reposition the light unit and tighten the screws. Job done.
Updated on 6 August 2026 by ScegliAuto
Related tutorials
Hyundai I10
(2007-2013 /
PA, MK 1)
In this very simple video guide, you will learn how to remove the front headlight bulb of a Hyundai I10. The removal process takes a few minutes and …
Hyundai I10
(2013-2020 /
MK 2, IA)
To replace the left front headlight bulb on a 2018 Hyundai i10, first open the bonnet and remove the screws located on the edge using a Torx key. Onc…
Hyundai I10
(2007-2013 /
PA, MK 1)
Below are the instructions on how to disassemble and replace the headlight bulb of the Hyundai I10. First, open the hood of the car and start by remo…
Other guides you may be interested in |
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
